Accept Cookies?
Provided by OpenGlobal E-commerce
Scotch-yoke valve actuators

Overview

PN and HY-Series pneumatic and hydraulic scotch-yoke valve actuators have been designed specifically to guarantee long cycle life in the most demanding applications and environmental conditions. A fabricated steel frame, coupled with an all-steel construction, results in lighter and more corrosion resistant scotch-yoke valve actuators than traditional designs employing castings. A light design, superior corrosion resistance and an Ingress Protection rating of IP66 as standard make PN & HY-Series scotch-yoke valve actuators an ideal choice for offshore applications, or any other in which weight and corrosion resistance are critical design considerations.


Applications

Automation of any quarter-turn mechanism; including ball, butterfly & plug valves and louvers & dampers.


Operating Ranges

Supply Pressures

  • PN-Series: 2.7 to 12 Barg (40 to 174 psig)
  • HY-Series: 13 to 250 Barg (189 to 3,625 psig)

Torque Outputs

  • 200 to 680,000 Nm (1,770 to 6,018,000 lb in)

Temperatures

  • Ultra-low: -65 to +80°C (-85 to +176°F) (HY-Series only)
  • Low: -45 to +60°C (-49 to +140°F)
  • Standard: -20 to +80°C (-4 to 176°F)
  • High: -20 to +140°C  (-4 to +284°F)

Key Features & Benefits

  • Third party approved for use in SIL 3 certified systems

  • Electroless nickel plated cylinder as standard with hard chromium plating, Xylan® or Electro-film available

  • Springs contained within a fully welded canister (which is post weld heat treated) to guarantee simple and safe removal

  • Springs are scragged (set removal) in order to warrant optimum and stable output torque characteristics

  • Easy and economical maintenance due to simplified design, no special tools required

  • Compliant to PED 97/23/EC

  • Modular construction means greater flexibility when selecting cylinder/spring combinations, and reduces production downtime during field servicing

  • Various scotch-yoke configurations (symmetrical, demi-canted and canted) allows for optimum and cost effective valve actuator sizing

  • Suitable for high frequency and high speed operation

  • Guide bar frame design used to eliminate side forces and low friction seals ensure high efficiency, even at low supply pressures


Additional Resources

Go to top

 

Valve Actuators Control Systems Other Solutions
Quarter-Turn - Linear - Gas-Over-Oil - Direct Gas - Subsea - Electric Self-Contained Electric-Hydraulic - Positioning - HPUs - Turbine Bypass - HIPPS - ASV PST Controller - TVC Positioner - Gas Odourisers - Pipeline Strainers

England
Paladon Systems Ltd

England

Tel: +44 (0)1604 880700
Fax: +44 (0)1604 882424
info@paladonsystems.com

Scotland
Paladon Systems Ltd

Scotland

Tel: +44 (0)1224 772442
Fax: +44 (0)604 882424
info.scotland@paladonsystems.com

Italy
Paladon Italia Srl

Italy

Tel: +39 0383 878524
Fax: + 39 0383 878042
info.italia@paladonsystems.com

Malaysia
Paladon Systems Sdn Bhd

Malaysia

Tel: +603 5614 3211
Fax: +603 5614 4511
info.asiapacific@paladonsystems.com

Russian Federation
Paladon SDT

Russian Federation

Tel: +7 495 735 28 07 (08) (09)
Fax: +7 495 735 28 07 (08) (09)
info.russianfederation@paladonsystems.com
United States
Paladon Americas

United States

Tel: +1 855 725 2366
Fax: +1 832 310 2370
info@paladonamericas.com


© Copyright 2015 Paladon Systems Ltd. All Rights Reserved.